IRIRMCF343高性能1500W马达控制办理方案

amandababy

IR 公司的IRMCF343是高性能{方案}RAM的马达控制,对于高端变频电器马达控制具有低本钱和高性能的优势.IRMCF343集成了两个盘算引擎:一个是用于无传感器永磁马达控制的运动控制引擎(MCETM),另一个是8位高速MCU(8051).晶振频率最大为60MHz,内部时钟最大为128MHz,无传感器控制盘算时间典范为11us,MCETM盘算数据范围16位.本京电港论坛文章先容了IRMCF343性能优势和主要特点,方框架图和典范应用框架图,以及1700W IRMCS3043马达驱动平台主要特点和性能指标与IRMCS3043参考方案套件.

IRMCF343 is a high performance RAM based motion control IC designed primarily for appliance applications. IRMCF343 is designed to achieve low cost and high performance control solutions for advanced inverterized appliance motor control.

IRMCF343 contains two computation engines. One is Motion Control Engine (MCETM) for sensorless control of permanent magnet motors; the other is an 8-bit high-speed microcontroller (8051). Both computation engines are integrated into one monolithic chip. The MCETM contains a collection of control elements such as Proportional plus Integral, Vector rotator, Angle estimator, Multiply/Divide, Low loss SVPWM, Single Shunt IFB. The user can program a motion control algorithm by connecting these control elements using a graphic compiler. Key components of the sensorless control algorithms, such as the Angle Estimator, are provided as complete pre-defined control blocks implemented in hardware. A unique analog/digital circuit and algorithm to fully support single shunt current reconstruction is also provided. The 8051 microcontroller performs 2-cycle instruction execution (60MIPS at 120MHz). The MCE and 8051 microcontroller are connected via dual port RAM to process signal monitoring and command input. An advanced graphic compiler for the MCETM is seamlessly integrated into the MATLAB/Simulink environment, while third party JTAG based emulator tools are supported for 8051 developments. IRMCF343 comes with a small QFP64 pin lead-free package.

IRMCF343性能总结:

Maximum crystal frequency 60 MHz

Maximum internal clock (SYSCLK) frequency 128 MHz

Sensorless control computation time 11 μsec typ

MCETM computation data range 16 bit signed

Program RAM loaded from external EEPROM 48K bytes

Data RAM 8K bytes

GateKill latency (digital filtered) 2 μsec

PWM carrier frequency counter 16 bits/ SYSCLK

A/D input channels 5

A/D converter resolution 12 bits

A/D converter conversion speed 2 μsec

8051 instruction execution speed 2 SYSCLK

Analog output (PWM) resolution 8 bits

UART baud rate (typ) 57.6K bps

Number of I/O (max) 23

Package (lead-free) QFP64

IRMCF343主要特点: