查看: 6457|回复: 0

[人才] RenesasRX62T马达控制办理方案(YMCRPRX62T)

[复制链接] qrcode

9

主题

0

帖子

28

积分

新手上路

Rank: 1

积分
28
发表于 2017-1-19 11:47 PM | 显示全部楼层 |阅读模式

Renesas公的RX62T是接纳100-MHz 32位RX mcu,工作频率高达100MHz,100MHz时性能为165DMIPS,具有单精度32位IEEE-754浮点,累加器能从32x32位运算中处理64位效果,乘法和除法单位能处理32x32位运算,具有快速中断功能,集成了12位ADC,100MHz PWM,工作电压3.3V或5V,主要用于家用电器,工业自动化,办公设备,音频设备和消费类电子产物等.本京电港论坛文章先容了RX62T系列主要特点,方框架图,RX62T马达控制评估套件的性能和功能,技能特点和完整的电路原理图纸.

RX62T系列主要特点:

■ 32-bit RX CPU core

 Max. operating frequency: 100 MHz Capable of 165 DMIPS in operation at 100 MHz

 Single precision 32-bit IEEE-754 floating point

 Accumulator handles 64-bit results (for a single instruction) from 32- × 32-bit operations

 Multiplication and division unit handles 32- × 32-bit operations (multiplication instructions take one CPU clock cycle)

 Fast interrupt

 Divider (fastest instruction execution takes two CPU clock cycles)

 Fast interrupt

 CISC Harvard architecture with 5-stage pipeline

 Variable-length instructions: Ultra-compact code

 Background JTAG debugging plus high-speed tracing

■ Operating voltage

 Single 3.3- or 5-V supply; 5-V analog supply is possible with 3.3-V products

■ Low-power design and architecture

 Four low-power modes

■ On-chip main flash memory, no wait states

 100-MHz operation, 10-ns read cycle

 No wait states for reading at full CPU speed

 64-Kbyte/128-Kbyte/256-Kbyte capacities

 For instructions and operands

 User code programmable via the SCI or JTAG

■ On-chip data flash memory

 Max. 32 Kbytes, reprogrammable up to 30,000 times

 Erasing and programming impose no load on the CPU.

■ On-chip SRAM, no wait states

 8-Kbyte/16-Kbyte SRAM

 For instructions and operands

■ DMA

 DTC: The single unit is capable of transfer on multiple channels

■ Reset and supply management

 Power-on reset (POR)

 Low voltage detection (LVD) with voltage settings

■ Clock functions

 External crystal oscillator or internal PLL for operation at 8 to 12.5 MHz

 Internal 125-kHz LOCO for the IWDT

 Detection of main oscillator stoppage (for IEC 60730 compliance)

■ Independent watchdog timer (for IEC60730compliance)

 125-kHz LOCO clock operation

 Software is incapable of stopping the robust WDT.

■ Up to 7 communications interfaces

 1: CAN (compliant with ISO11898-1), incorporating 32 mailboxes

 3: SCIs, with asynchronous mode (incorporating noise cancellation), clock-synchronous mode, and smart-card interface mode

 1: I2C bus interface, capable of SMBus operation

 1: RSPI

 1: LIN

■ Up to 16 16-bit timers

 8: 16-bit MTU3: 100-MHz operation, input capture, output compare, two three-phase complementary PWM output channels, complementary PWM imposing no load on the CPU, phase-counting mode

 4: 16-bit GPT: 100-MHz operation, input capture, output compare, four complementary single-phase PWM output channels, or one three-phase complementary PWM output channel and one single-phase complementary PWM output channel, complementary PWM imposing no load on the CPU, operation linked with comparator (forcounting and control of PWM-signal negation), detection of abnormal oscillation frequencies (for IEC 60730 compliance)

 4: 16-bit CMT

■ Three A/D converter units for 1-MHz operation, for a total of 20 channels

 Three units are capable of simultaneous sampling on seven channels

 Self diagnosis (for IEC60730 compliance)

 8: Two 12-bit ADC units: three sample-and-hold circuits, double data registers, amplifier, comparator

 12: Single 10-bit ADC unit

■ CRC (cyclic redundancy check) calculation unit

 Monitoring of data being transferred (for IEC 60730 compliance)

 Monitoring of data in memory (for IEC 60730 compliance)

■ Up to 61 inputCoutput ports and up to 21 input-only ports

 PORT registers: Monitoring of output ports (for IEC 60730 compliance)

■ Operating temp. range

 C40C to +85C

图1{京电港论坛}.RX62T系列方框架图

RX62T马达控制评估套件

Ready-to-use Platform for Evaluating Sensorless Vector Control and Position Control With the Renesas RX600 Motor Control Evaluation Kit, you can:

■■ Learn the RX62T motor control feature set

■■ Explore advanced motor control algorithms

■■Monitor speed and position regulation

■■Observe responsiveness to load changes

■■ Connect with user- supplied inverter

■■ Debug using on-board test points and the E1 emulator User-friendly GUI for  Performance Evaluation

■■ Speed, voltage and current tracking

■■ Bi-directional speed/position control

■■User selectable vector control algorithms

■■ System status indicator

■■ Data-logging

Kit also offers:

■■ Sensorless vector control (1 or 3 shunt)

■■ External or internal PGA selection (via jumpers)

■■ Position control using encoder

■■ Standalone mode using LCD and push-button

■■ Connector for user-supplied inverter stage

Use the Renesas RX600 Motor Control Evaluation Kit to develop your motor control solutions. With its high-performance CPU and FPU capability, and advanced analog and timer peripherals, the RX62T is an ideal MCU for inverter and motor control applications. The RX62T firmware supports many kinds of motor control, including high-precision three-phase sensorless vector control. The supplied GUI provides precise tracking of speed, position, voltage and current.

The RX62T Motor Control Kit is an evaluation tool for Renesas microcontrollers and incorporates the following features:

• Single board that consists of MCU and inverter stage

• Capability to drive two motors:

24V up to 5A 3-phase Brushless DC motor with hall sensors, encoder and sensor-less with on-board hardware

Any 3-phase Brushless DC or AC Induction motor with user-supplied power stage

• Support for dual operation mode:

GUI mode : controlled by GUI from a personal computer through USB connection Standalone mode:controlled by on-board potentiometer, pushbuttons and LCD

• Ease-of-use:

User code debugging

User interface such as: switches, potentiometer, LED, LCD

Sample application code

Sample peripheral initialization code

• Multiple sensor and sensor-less motor control algorithms

Three-shunt and single-shunt current measurement support

External amplifier and internal PGA support

• On-board USB isolator for E1 emulator

RX62T马达控制评估套件应用:

Home appliances, industrial automation, office equipment, audio equipment, consumer products etc.

RX62T马达控制评估套件包罗:

--Control Board with RX62T MCU and RJK0656DPB Power MOSFETs

--24V/4-pole BLDC motor with encoder and hall sensor

--E1 debugger for software debugging and Flash programming

--CD ROM containing sample code, motor control library, HEW IDE and evaluation copy of Renesas RX compiler, schematics, user guide and application notes


图2{京电港论坛}.RX62T马达控制评估套件外形实物图

RX62T马达控制评估套件技能特点:






图3{京电港论坛}.RX62T马达控制评估套件电路原理图纸(1)

图4{京电港论坛}.RX62T马达控制评估套件电路原理图纸(2)

图5{京电港论坛}.RX62T马达控制评估套件电路原理图纸(3)

图6{京电港论坛}.RX62T马达控制评估套件电路原理图纸(4)

图7{京电港论坛}.RX62T马达控制评估套件电路原理图纸(5)

图8{京电港论坛}.RX62T马达控制评估套件电路原理图纸(6)

图9{京电港论坛}.RX62T马达控制评估套件电路原理图纸(7)

图1{京电港论坛}0.RX62T马达控制评估套件电路原理图纸(8)

图1{京电港论坛}1.RX62T马达控制评估套件电路原理图纸(9)

图1{京电港论坛}2.RX62T马达控制评估套件电路原理图纸(10)

图1{京电港论坛}3.RX62T马达控制评估套件电路原理图纸(11)

图1{京电港论坛}4.RX62T马达控制评估套件电路原理图纸(12)

图1{京电港论坛}5.RX62T马达控制评估套件电路原理图纸(13)

图1{京电港论坛}6.RX62T马达控制评估套件电路原理图纸(14)

图1{京电港论坛}7.RX62T马达控制评估套件电路原理图纸(15)

图1{京电港论坛}8.RX62T马达控制评估套件电路原理图纸(16)

图1{京电港论坛}9.RX62T马达控制评估套件电路原理图纸(17)

图2{京电港论坛}0.RX62T马达控制评估套件电路原理图纸(18)
详情请复制打开此衔接地址:
http://documentation.renesas.com/doc/products/mpumcu/doc/rx_family/r01ds0096ej_rx62t.pdf

http://am.renesas.com/media/applications/key_technology/motor_control/reference/rx/YMCRPRX62T_User_Manual.pdf

以及
http://am.renesas.com/media/applications/key_technology/motor_control/reference/rx/YMCRPRX62T_Schematic.pdf

本帖子中包含更多资源

您需要 登录 才可以下载或查看,没有帐号?立即注册

x
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 立即注册

本版积分规则

快速回复 返回顶部 返回列表