[方案]STSTGIB15CH60TS－L马达控制电源板参考方案

ST公司的STGIB15CH60TS-L是SLLIMM™ - 2系列低损耗智能电源模块(IPM),提供在低压MCU和主电源马达间直接毗连,工作频率高达20kHz,功率范围高达3kW.器件在25°C时额定电流3A-5A,耐压600V,主要用于马达驱动的三相逆变器,以及家用电器如洗衣机,电冰箱,空调和缝纫机等.本文先容了STGIB15CH60TS-L 主要特点,功能框架图和应用框架图,以及马达控制电源板STEVAL-IPM15B主要特点,架构图,电路图,质料清单和PCB设计原理图.

SLLIMM™ - 2^nd series IPM, 3-phase inverter, 20 A, 600 V short-circuit rugged IGBTs ST’s SLLIMM™ family of small low-loss intelligent molded modules enhances the efficiency of home appliance motor drives working up to 20 kHz in hard-switching circuitries and of applications with a power range up to 3 kW.

ST’s intelligent power modules (IPMs) provide a direct connection between a low-voltage microcontroller and a mains-powered electric motor. They greatly reduce costs by simplifying design and significantly reducing component count while saving space, improving reliability and lowering EMI. Available in several package options (fully molded and DBC), current ratings and driving options, they feature the best compromise between conduction and switching losses, along with outstanding robustness and EMI behavior.

STGIB15CH60TS-L主要特点:

3A-5A current rating at 25℃, with 600V breakdown voltage;
Lower V_CE(sat) 1.65V even at 5A, due to the TFS technology;
Low EMI;
Mounted slot package options allowing easier and lower-cost heatsink assembly;
Integrated bootstrap diode for lower BOM and simplified PCB layout;
150°C maximum operating junction temperature;
Integrated op amp and comparator that can be used for protection circuits;
Separate open emitter outputs to simplify PCB routing for both single and three shunt solutions;
NTC (Negative Temperature Coefficient) for temperature monitoring;
Smart shutdown function;
In-line and zig-zag lead options, with/without stand-off, for maximum layout flexibility;
1500 V_rms minimum isolation

STGIB15CH60TS-L应用:

• 3-phase inverters for motor drives
• Home appliances such as washing machines,refrigerators, air conditioners and sewing
machines

图1.STGIB15CH60TS-L框架图

图2.STGIB15CH60TS-L应用框架图

马达控制电源板STEVAL-IPM15B

The STEVAL-IPM15B is a compact motor drive power board based on the SLLIMM™ (small low-loss intelligent molded module) 2^nd series module STGIB15CH60TS-L. It provides an affordable, easy-to-use solution for driving high power motors for a wide range of applications such as white goods, air conditioners,compressors, power fans, high-end power tools, and generally 3-phase inverters for motor drives. The IPM itself consists of short-circuit rugged IGBTs and a wide range of features including undervoltage lockout, smart shutdown, temperature sensing and NTC inside, and overcurrent protection. The main characteristics of this evaluation board are its small size, minimal BOM and high efficiency. It consists of an interface circuit (BUS and Vcc connectors), bootstrap capacitors, snubber capacitor, hardware short-circuit protection, fault event signal and temperature monitoring. In order to increase its flexibility,it was designed to work in single or three-shunt configuration and with double current sensing options such as three dedicated op-amps on-board, or op-amps embedded on the MCU. A Hall/Encoder part completes the circuit. Thanks to these advanced characteristics, the system has been specifically designed to achieve accurate and fast conditioning of the current feedback, matching the typical requirements for field-oriented control (FOC). The STEVAL-IPM15B is compatible with ST’s STM32-based control board, providing a complete platform for motor control.

马达控制电源板STEVAL-IPM15B主要特点:

Input voltage: 125 - 400 V_DC
Nominal power: up to 1500 W
Input auxiliary voltage: up to 20 V DC
Single- or three-shunt resistors for current sensing (with sensing network)
Two options for current sensing: dedicated op-amps or through MCU
Overcurrent hardware protection
IPM temperature monitoring and protection
Hall sensor or encoder input
Uses the STGIF5CH60TS-L IGBT intelligent power module from the 2^nd series of SLLIMM™ IPMs
Motor control connector (32-pin) to interface with ST MCU boards
Universal conception for further evaluation with breadboard and testing pins
Very compact size

图3.马达控制电源板STEVAL-IPM15B架构图

图4.马达控制电源板STEVAL-IPM15B外形图(正面)

图5.马达控制电源板STEVAL-IPM15B外形图(反面)

图6.马达控制电源板STEVAL-IPM15B电路图(1)

图7.马达控制电源板STEVAL-IPM15B电路图(2)

图8.马达控制电源板STEVAL-IPM15B电路图(3)

图9.马达控制电源板STEVAL-IPM15B电路图(4)

图10.马达控制电源板STEVAL-IPM15B电路图(5)
马达控制电源板STEVAL-IPM15B质料清单:





图11.马达控制电源板STEVAL-IPM15B PCB设计原理图(正面)

图12.马达控制电源板STEVAL-IPM15B PCB设计原理图(反面)
详情请复制打开此衔接地址:
http://www2.st.com/content/ccc/resource/technical/document/datasheet
/d3/bd/7d/c1/60/b8/48/e8/DM00123000.pdf/files/DM00123000.pdf/jcr:content/translations/en.DM00123000.pdf
和http://www2.st.com/content/ccc/resource/technical/document/user_manual
/group0/95/29/fa/7d/db/77/43/80/DM00264048/files/DM00264048.pdf/_jcr_content/translations/en.DM00264048.pdf
以及http://www2.st.com/content/ccc/resource/technical/layouts_and_diagrams/schematic_pack/9d/36/45/54/3d/c5/4e/32/steval-ipm15b_schematic.pdf/files/steval-ipm15b_schematic.pdf/_jcr_content/translations/en.steval-ipm15b_schematic.pdf
en.DM00123000.pdf
en.DM00264048.pdf
en.steval-ipm15b_schematic.pdf