烽火社区 首页 方案 工业控制 马达控制 查看内容
仪器仪表 工业电子 医疗设备 智能装备 智能控制 马达控制 LED照明

AvagoACPL-P343(W343)IGBT栅极驱动方案

2017-11-24 09:21 AM| 发布者: 王利芳aa| 查看: 2668| 评论: 0

摘要: Avago公司的ACPL-P343(W343)是4A输出的IGBT栅极驱动光耦合器,集成了一个AlGaAsLED,VCC工作电压15V-30V,工作温度-40℃到105℃,输出电压轨到轨,CMR大于35kV/us,符合安全尺度ULRecognized3750/5000VRMSfor1min.,CSA和IE ...

Avago公司的ACPL-P343 (W343)是4A输出的 IGBT栅极驱动光耦合器,集成了一个AlGaAs LED, VCC工作电压15V-30V,工作温度-40℃ 到105℃,输出电压轨到轨,CMR大于35 kV/us,符合安全尺度UL Recognized 3750/5000 VRMS for 1 min., CSA和IEC/EN/DIN EN 60747-5-2 VIORM = 891/1140 Vpeak.主要用在IGBT/MOSFET栅极驱动,AC和无刷DC马达驱动,再生能源逆变器,工业逆变器和开关电源.本京电港论坛文章先容了ACPL-P343/W343主要特点, 功能方框架图,两种推荐的应用电路以及ACPL-P34X/W34X评估板主要特点,电路原理图纸和PCB线路板元件结构图.

ACPL-P343 and ACPL-W343: 4.0 Amp Output Current IGBT Gate Drive Optocoupler with Rail-to-Rail Output Voltage in Stretched SO6

The ACPL-P343/W343 contains an AlGaAs LED, which is optically coupled to an integrated circuit with a power output stage. This optocoupler is ideally suited for driving power IGBTs and MOSFETs used in motor control inverter applications. The high operating voltage range of the output stage provides the drive voltages required by gate controlled devices. The voltage and high peak output current supplied by this optocoupler make it ideally suited for direct driving IGBT with ratings up to 1200 V / 200 A. For IGBTs with higher ratings, this optocoupler can be used to drive a discrete power stage which drives the IGBT gate.

The ACPL-P343 and ACPL-W343 have the highest insulation voltage of VIORM = 891 Vpeak and VIORM = 1140 Vpeak respectively in the IEC/EN/DIN EN 60747-5-2.

ACPL-P343/W343主要特点:

4.0 A maximum peak output current

3.0 A minimum peak output current

Rail-to-rail output voltage

200 ns maximum propagation delay

100 ns maximum propagation delay difference

LED current input with hysteresis

35 kV/us minimum Common Mode Rejection (CMR) at VCM = 1500 V

ICC = 3.0 mA maximum supply current

Under Voltage Lock-Out protection (UVLO) with hysteresis

Wide operating VCC Range: 15 to 30 V

Industrial temperature range: -40℃ to 105℃

Safety Approval Pending

C UL Recognized 3750/5000 VRMS for 1 min.

C CSA

C IEC/EN/DIN EN 60747-5-2 VIORM = 891/1140 Vpeak

ACPL-P343/W343应用:

IGBT/MOSFET gate drive

AC and Brushless DC motor drives

Renewable energy inverters

Industrial inverters

Switching power supplies

图1{京电港论坛}.ACPL-P343/W343功能方框架图

图2{京电港论坛}.ACPL-P343/W343推荐的应用电路原理图纸(1)

Recommended application circuit with split resistors LED drive

图3{京电港论坛}.ACPL-P343/W343推荐的高CMR驱动电路原理图纸

ACPL-P34X/W34X评估板

The ACPL-P34X/W34X evaluation board allows a powerinverter designer to easily test the drive, rail-to-rail and speed capability of the ACPL-P343/W343 gate drive optocoupler.

The evaluation board includes two separate gate drive channels (one optocoupler per channel) making it a half-bridge topology for driving directly the gates of high-side and low-side IGBTs of a power inverter (such as single-phase motor inverter or one phase of a 3-phase motor inverter). This evaluation board can also support ACPL-P341/W341 and ACPL-P340/W340.

ACPL-P34X/W34X评估板主要特点:

Half-Bridge topology

Footprints for bootstrap power supply confi guration

Works for IGBT TO-220 / TO-247 type

Able to evaluate the 4 A drive, rail-to-rail and speed performance

Footprints for PCB线路板 mounting terminal blocks for wire connections to motor

Split resistors network to achieve high CMR response

Example of good bypass capacitors layout

Supports ACPL-P341/W341 and ACPL-P340/W340

ACPL-P34X/W34X评估板应用:

Isolated IGBT/MOSFET Gate Drive

AC and Brushless DC Motor Drives

Industrial Inverters

Renewable Energy Inverters

Uninterruptible Power Supplies (UPS)

图4{京电港论坛}.ACPL-P34X/W34X评估板电路原理图纸(顶层)

图5{京电港论坛}.ACPL-P34X/W34X评估板电路原理图纸(低层)

图6{京电港论坛}.ACPL-P34X/W34X评估板PCB线路板元件结构图

详情请复制打开此衔接地址:
http://www.avagotech.com/docs/AV02-2928EN

http://www.avagotech.com/docs/AV02-2927EN


鲜花

握手

雷人

路过

鸡蛋

相关阅读

热点图文
推荐阅读
文章排行
返回顶部