|
Allegro公司的ACS710是120kHz带宽霍尔电传播感器,包罗高度线性的霍尔传感器和靠近硅芯片外貌的铜导电通路(根本电阻1毫欧姆), 适合于火线应用的高绝缘电压,单电源3-5.5V工作,主要应用在马达控制,负载管理和过流检测,电源转换和电池监测.本京电港论坛文章先容了ACS710的主要特点,功能方框架图和典范应用电路. The Allegro® ACS710 current sensor provides economical and precise means for current sensing applications in industrial, commercial, and communications systems. The device is offered in a small footprint surface mount package that allows easy implementation in customer applications. The ACS710 consists of a precision linear Hall sensor integrated circuit with a copper conduction path located near the surface of the silicon die. Applied current flows through the copper conduction path, and the analog output voltage from the Hall sensor linearly tracks the magnetic field generated by the applied current. The accuracy of the ACS710 is maximized with this patented packaging configuration because the Hall element is situated in extremely close proximity to the current to be measured. High level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, guarantees low ripple at output and low offset drift in high-side, high voltage applications. The voltage on the Overcurrent Input (VOC pin) allows customers to define an overcurrent fault threshold for the device. When the current flowing through the copper conduction path (between the IP+ and IPC pins) exceeds this threshold, the open drain Overcurrent Fault pin will transition to a logic low state. Factory programming of the linear Hall sensor inside of the ACS710 results in exceptional accuracy in both analog and digital output signals. The internal resistance of the copper path used for current sensing is typically 1 mΩ, for low power loss. Also, the current conduction path is electrically isolated from the low voltage sensor inputs and outputs. This allows the ACS710 family of sensors to be used in applications requiring electrical isolation, without the use of optoisolators or other costly isolation techniques. ACS710主要应用: • Motor control and protection • Load management and overcurrent detection • Power conversion and battery monitoring ACS710主要特点和优势: ▪ Industry-leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques ▪ Small footprint package suitable for space-constrained applications ▪ 1 mΩ primary conductor resistance for low power loss ▪ High isolation voltage, suitable for line-powered applications ▪ User-adjustable Overcurrent Fault level ▪ Overcurrent Fault signal typically responds to an overcurrent condition in < 2 μs ▪ Integrated shield virtually eliminates capacitive coupling from current conductor to die due to high dV/dt voltage transients ▪ Filter pin capacitor improves resolution in low bandwidth applications ▪ 3 to 5.5 V, single supply operation ▪ Factory trimmed sensitivity and quiescent output voltage ▪ Chopper stabilization results in extremely stable quiescent output voltage ▪ Ratiometric output from supply voltage
详情请复制打开此衔接地址: |
热点图文