Raspbian3.0也无法启动，啥情况？

AnnyZhao

U-Boot SPL 2014.04-10691-g493a12c (Jul 02 2014 - 15:02:40)
Board: Bananapi
DRAM: 1024 MiB
CPU: 960000000Hz, AXI/AHB/APB: 3/2/2
spl: not an uImage at 1600


U-Boot 2014.04-10691-g493a12c (Jul 02 2014 - 15:02:40) Allwinner Technology

CPU:   Allwinner A20 (SUN7I)
Board: Bananapi
I2C:   ready
DRAM:  1 GiB
MMC:   SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment

In:    serial
Out:   serial
Err:   serial
Net:   dwmac.1c50000
Hit any key to stop autoboot:  0 
reading uEnv.txt
350 bytes read in 17 ms (19.5 KiB/s)
Loaded environment from uEnv.txt
Running uenvcmd ...
reading bananapi/script.bin
52468 bytes read in 65 ms (788.1 KiB/s)
reading bananapi/uImage
Error reading cluster
** Unable to read file bananapi/uImage **
## Booting kernel from Legacy Image at 48000000 ...
   Image Name:   Linux-3.4.90
   Image Type:   ARM Linux Kernel Image (uncompressed)
   Data Size:    5141800 Bytes = 4.9 MiB
   Load Address: 40008000
   Entry Point:  40008000
   Verifying Checksum ... Bad Data CRC
ERROR: can\'t get kernel image!

折腾了一晚上，一个系统也没跑起来

最终回归RaspBian2.0

太受挫了。

行云流水

啥情况，谁碰到过

Mrli2014

试试 Lubuntu3，我测试过能正常启动。

豆豆笑笑

刚刚试了一下3.0  SD卡刷好  第一次开机时快到桌面的地方停止不动了  直接按板子上电源按钮关机  在启动  能进入系统

回复用户1

获取不到内核镜像，肿么回事

autumn_stone

 修改config 文件没？我的刷Raspbian 直接进入系统呢