TI bq50121015W输出WPCv1．2无线电源数字控制器解决方案

TI公司的bq501210是符合无线充电同盟(WPC) v1.2尺度的无线电源数字控制器,集成了符合WPC的吸收器无线传输功率所需的逻辑功能,最高能够传输15W功率,12V至19V输入,具有双向通信,支持对兼容吸收器举行快速充电,可选择提供5W WPC低功率或15W中等功率,主要用在WPCv1.2无线充电器如Qi认证智能手机,平板电脑和其它手持设备,销售点设备和定制无线电源.本文先容了bq501210主要特点,功能框架图,系统框架图以及评估板bq501210EVM-756主要特点,电路图和质料清单.

The bq501210 is a Wireless Power Consortium (WPC) v1.2 compliant wireless power digital controller that integrates the logic functions required to wirelessly transfer power to a WPC-compliant receiver with the capability of delivering up to 15 W. The bq501210 is an intelligent device that periodically pings the surrounding environment for available devices to be powered, detects if a foreign metal object is present on the charging pad, monitors all communication from the device being wirelessly powered, and adjusts power applied to the transmitter coil per feedback received from the powered device.

The bq501210 also manages the fault conditions associated with the power transfer and controls the operating mode status indicator. The bq501210 uses a rail voltage control scheme instead of the traditional frequency control to adjust the amount of power delivered to the receiver.

Through negotiation with a High Voltage Dedicated Charging Port (HVDCP) adapter, the bq501210 provides power between the WPC low power capability of 5 W, and the medium power specifications of 15 W.Fast Charge support provides more power for compatible receiver devices.

bq501210主要特点:

Qi-Certified Wireless Power Consortium (WPC) v1.2 Solution for 15-W Operation
Faster Charging Time
Backward Compatible With Existing 5-W WPC Receivers
12-V to 19-V Input, Fixed Frequency, Rail Voltage Control Architecture
15 V to 19 V can achieve 15 W
9 V and 12 V capable for HVDCP
Dynamic Power Limiting (DPL) Allows Operation From Weak Supplies
Conforms to WPC MP-A5 Transmitter Type Specification
Enhanced Foreign Objection Detection (FOD) Implementation With FOD Ping that Detects Metal Objects Prior to Power Transfer
Low Standby Power During Idle and ‘Charge Complete’
Bi-directional Communication
Digital Demodulation Reduces Components and Simplifies Circuitry
Support Fast Charge Operation with Compatible Receivers
10 Configurable LED Modes Indicate Charging State and Fault Status

bq501210应用:

WPC v1.2 Wireless Chargers:
Smart Phones, Tablets, and Other Handhelds
Point-of-Sale Devices
Custom Wireless Power Application

图1.bq501210功能框架图

图2.bq501210系统框架图

评估板bq501210EVM-756

The bq501210EVM-756 wireless power transmitter evaluation module from Texas Instruments is a high-performance, easy-to-use development module for the design of wireless power solutions. The bq501210 evaluation module (EVM) provides all the basic functions of a Qi-compliant, wireless charger pad.  The 19-V input, single coil transmitter (TX) enables designers to speed the development of their end-applications  The EVM supports WPC v1.0, WPC v1.1 and WPC v1.2 receivers (RX) and supports output power up to 15W when paired with the bq55221EVM-713.  The bq501210 EVM also operates with any Qi WPC v1.1 RX.

The bq501210EVM-756 EVM demonstrates the transmitter portion of the bqTESLA™ wireless power system.  This transmitter EVM is a complete transmitter-side solution that powers a bqTESLA receiver.  The EVM requires a single 12-V power supply capable of up to 2.0A to operate and combines the transmitter electronics, input pwoer circuit, LED indicators, and the transmitting coil on the single printed-circuit board (PCB).  The EVM is a non-space optimized, open design allowing easy access to key points of the electrical schematic.

评估板bq501210EVM-756主要特点:

WPC v1.2 15-W charging capability with bq55221 receiver
5-W solution for WPC v1.1 receivers
15-V to 19-V input and fixed operatiing frequency for full 15-W results
12-V input for reduced power (> 10W) solutions
Enchanced Foreign Object Detection (FOD) with FOD ping detecting objects prior to power transfer
WPC v1.2 FOD, WPC v1.1 FOD and WPC v1.0 Parasitic metal Object Detection (PMOD)
Transmitter-coil mounting pad providing the corectereceiver interface
Compact power section design using the bq500100 NexFET power stage
Wurth 760 308 141 transmitter coil with no magnet
LED and audio indication of power transfer

图3.评估板bq501210EVM-756外形图

BQ501210EVM-756 bq501210 WPC 1.2 Wireless Power Transmitter Manager Evaluation Module with 15-W Power Delivery Board Image

评估板bq501210EVM-756电参数指标:


图4.评估板bq501210EVM-756完整电路图

图5.评估板bq501210EVM-756电路图:发送器管理电路

图6.评估板bq501210EVM-756电路图:电流检测电路

图7.评估板bq501210EVM-756电路图:线圈控制电路

图8.评估板bq501210EVM-756电路图:电源电路

图9.评估板bq501210EVM-756电路图
评估板bq501210EVM-756质料清单:


详情请复制打开此衔接地址:
http://www.ti.com/lit/ds/symlink/bq501210.pdf
和http://www.ti.com/lit/ug/slvuao6/slvuao6.pdf